 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CORCOM Product Guide Multi-Function Power Entry Modules with RFI Power Line Filters LA Series UL Recognized CSA Certified VDE Approved FLA/XLA/ZLA LA Series The LA series is a multi-function power entry connector with a choice of filtering capabilities. The series features an IEC power line connector, selectable North American or dual European fusing capabilities, DPST on/off switch, and 120/240 voltage selection. The filtered LA units provide a one piece solution to power entry needs and provide a filtering solution for almost any RFI problem. Their vertical design is flange mounted. This series offers three levels of filtering, all carrying UL recognition, CSA certification, and VDE approval. FLA Model - General purpose RFI filter designed for susceptibility applications, effectively providing RFI control of line-to-ground noise. XLA Model - High performance RFI filter designed to bring most digital equipment (including switching power supplies) into compliance with FCC Part 15J, Class B conducted emissions limits. ZLA Model - Premium performance RFI filter designed to bring most digital equipment (including switching power supplies) into compliance with EN55022, Level B (as well as FCC Part 15J, Class B) conducted emissions limits. Voltage Selection To change selected voltage: remove the fuse cartridge using a small blade screwdriver or similar tool; select the desired voltage by matching the arrow on the fuse cartridge to the arrow located on the front of the unit (lower right corner); replace the fuse cartridge making sure the voltage selection arrow aligns with the arrow located on the front of the unit. Fuse Changing Remove the fuse cartridge using a small blade screwdriver or similar tool; for European fusing pull out the sliding fuse covers located at the top of each fuse compartment; insert desired fuses; push the sliding fuse covers back in place and insert the fuse cartridge back into the unit making sure the voltage selection arrow aligns with the arrow located on the front of the unit. (Note: Single North American or European fuse placement is always on the side of the desired voltage selection arrow behind the fuse symbol; the other compartment may be used as a spare or be left blank. Dual European fusing capability is available for 220/240 volts only.) 122 Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Specifications Maximum leakage current, each line-to-ground: @ 120 VAC 60 Hz: FLA Model 0.25 mA XLA/ZLA Models 0.30 mA @ 250 VAC 50 Hz: Hipot rating (one minute): line-to-ground line-to-line Operating voltages: Operating frequency: Rated voltage (max.): Switch: All Models 0.50 mA 1500 VAC 1450 VDC 110,120, 220/240 VAC 50/60 Hz 250 VAC Double-insulated, rated for 50,000 operations at full load. 35 Amp inrush capability Accepts one 1/4" x 1-1/4" fuse, or two 5 x 20 mm fuses .110 [2.79] terminals Fuse (not included): Terminals: Minimum insertion loss in dB: Line-to-ground in 50 ohm circuit Current Frequency-MHz Rating .01 .05 .15 .5 1 5 FLA 5A 14 21 26 40 XLA 3A 2 12 21 35 46 44 ZLA 3A 14 28 38 42 40 40 Line-to-line in 50 ohm circuit Current Rating XLA 3A ZLA 3A Frequency-MHz .02 .03 .05 .07 .15 .5 1 5 3 14 29 5 38 33 57 10 46 44 40 30 50 40 40 10 30 50 50 60 65 60 50 72 72 65 55 Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com CORCOM Product Guide Multi-Function Power Entry Modules with RFI Power Line Filters (Continued) LA Series Case Style FLA, XLA & ZLA A F B Case Dimensions Part No. 5EFLA2S 3EXLA2S C D A (max) 1.99 50.5 1.99 50.5 1.99 50.5 B 0.15 0.381 C (max) 2.59 65.79 2.59 65.79 2.59 65.79 D E F (max) (max) (max) 2.41 61.21 2.41 61.21 2.41 61.21 3.16 1.18 68.07 29.97 4.16 1.18 105.7 29.97 4.16 1.18 105.7 29.97 3EZLA2S 1.57 39.9 1.57 39.9 1.57 39.9 Power Entry Modules Typical dimensions: Terminals: .110 [4.80] Holes: .059 [1.5] Dia. Max., except solder lug ground tap with wire wrap. Mounting Holes: .142 [3.6] Dia. (2) Electrical Schematics FLA Power on/off Neutral C Ground D E F Phase G Customer Transformer Primaries D ABC 120V D E F 240V A B A B A or D 120V XLA & ZLA On/Off Neutral Hot Note: Provision for dual European fusing by connection to "A". Resistor location for reference only. Catalog 1654001 Revised 05-07 220-240 110-120 Recommended Panel Cutout FL, XLA & ZLA .093 R 2.36 E .140 Dia. (2) 3.56 2.42* 61.47 1.19* 30.23 1.57 39.88 * +.020 - .00 + 0.5 - .00 Note: All models allow front mounting only. Part Numbers 0 120V E F 5EFLA2S 3EXLA2S 3EZLA2S ABC 120V D E F 240V A B C D E F G D E F 120V A B A or D 120V Customer Transformer Primaries 123 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com |
Price & Availability of 3EZLA2S
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |